400v Specifications |
500V Specifications |
|
INPUT
|
| Input
supply voltages |
208 to 230Vac or 380
to 440Vac |
| Input supply
phases |
3 phase, 3 wire, earthed neutral |
| Input supply
tolerance |
-10% to +10% |
| Input
frequency range |
48 to 62Hz |
| Input current |
< output current |
| Input
displacement factor |
> 0.99 |
| Input current
THD |
< 40% |
| Power loss
ride through |
> 2 seconds at rated voltage |
|
OUTPUT
|
| Output voltage
to motor |
0 to Vin -3V
@ 100% load |
| Current
overload capability |
CT: 150% for 30 secs at 50°C
150% for 60 secs at 40°C
VT: 120% for 60 secs at 40°C |
| Frequency range |
0 to ±400Hz (max) |
| Efficiency
(full load, 50Hz) |
> 97% |
| Suit motor
rated voltages |
5 to 500Vac |
| Suit
motor rated frequencies |
10 to 400Hz |
| Modulation
method |
Space Vector modulation |
| Modulation
frequency |
Up to 16kHz Whisper Wave or Narrow
Band |
|
ENVIRONMENTAL
|
| Protection standard |
Enclosure, IP54/NEMA 12 |
| Operating temperature |
0°C to 50°C |
| Storage temperature |
-25°C to +80°C |
| Relative humidity |
<90%, noncondensing |
| Altitude |
1000m |
| Altitude derating (>1000m) |
-1% per 100m; 3000m max. |
| DRIVE PROTECTION |
| Supply loss |
Input phase loss |
| Software thermal model |
Heatsink overheat |
| IGBT overload |
Internal air overheat |
| Output current limit |
Output current trip |
| DC bus voltage limiting |
|
| Short circuited load |
Ground fault |
| Low DC bus voltage |
Regeneration limit |
| Hardware failure |
|
| MOTOR AND DYNAMIC BRAKE PROTECTION |
| Motor thermal model trip |
PTC thermistor trip |
| Overload warning |
Shear pin trip (configurable) |
| Dynamic brake resistor thermal model trip |
| Torque limit and time-out (configurable) |
| Speed limit and time-out (configurable) |
| CONTROL |
| Control method |
Flux vector or V/Hz control |
| Analogue inputs |
2 inputs, configurable as 0-10 Vdc,
±10Vdc, 4-20mA or 0-20mA |
| Digital inputs |
6 configurable inputs plus 1 PTC or trip input |
| Analogue outputs |
2 outputs, configurable as 0-10Vdc, ±10Vdc, 4-20mA or 0-20mA |
| Relay outputs |
1 changeover, 2 normally open, rated 250Vac or 30Vdc, 2A non-inductive. |
| DIMENSIONS |
| Item Reference |
H
mm (ins) |
W
mm (ins) |
D
mm (ins) |
Weight
kg (lbs) |
| E002 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E006 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E010 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E012 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E018 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E022 |
430 (16.9) |
139 (5.5) |
262 (10.3) |
10-14 (22-31) |
| E031 |
430 (16.9) |
279 (11) |
262 (10.3) |
27 (59.5) |
| E038 |
430 (16.9) |
279 (11) |
262 (10.3) |
27 (59.5) |
| E046 |
430 (16.9) |
279 (11) |
262 (10.3) |
27 (59.5) |
Model Selection Guide
|
|
